Installation - 2.7L
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
The camshaft position sensor is mounted in the front of the head. 4
- Install sensor in the chain case cover and push" sensor in until contact is made with the boss on the head. While holding the sensor in this position, install and tighten the retaining bolt to 12 N.m (105 in.lbs.) torque.
- Attach electrical connector to sensor.