Ignition Coil: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Prior to removing the ignition coils, spray compressed air around the coil area and spark plug.
- Remove electrical connector from ignition coil. On 3.5L engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the spacers under the coil when loosening the screws.
- Remove 2 fasteners from ignition coil assembly.
- Remove ignition coil assembly.