Spark Plug: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Always remove the ignition coil assembly by grasping at the spark plug boot, turning the assembly 1/2 turn and pulling straight back in a steady motion.
- Prior to removing the spark plug, spray compressed air around the coil area and spark plug.
- Remove electrical connector from ignition coil. On 3.5L engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the spacers under the coil when loosening the screws.
- Remove 2 fasteners from ignition coil.
- Remove ignition coil assembly.
- Remove the spark plug using a quality socket with a rubber or foam insert.
- Inspect the spark plug condition.