Front Camber Adjustment: Neon
- Camber is factory preset, but can be adjusted with a camber service kit. Raise and support vehicle. While holding lower strut attaching bolts stationary, loosen attaching nuts. See Fig 1. Remove upper attaching nut and bolt. Install camber service kit attaching/adjusting bolt and nut. While holding bolt stationary, lightly tighten nut. Repeat procedure for lower attaching nut and bolt.
- Pull out or push in top of tire until correct camber is obtained. See WHEEL ALIGNMENT SPECIFICATIONS . While holding bolts stationary, tighten nuts to specification. See TORQUE SPECIFICATIONS .
Courtesy of CHRYSLER LLC