Installation - 2.7L
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install throttle body and bolts.
- Tighten bolts to 11.9 N.m (105 in.lbs.) torque.
- Install the throttle body support bracket to the bottom of the throttle body. Tighten the bolts to 27.1 N.m (20 ft. lbs.) torque.
- Hold throttle lever in wide open throttle position. Install throttle cable and speed control cable.
- Install throttle cable bracket and tighten bolts.
- Install air plenum and tighten clamp.
- Connect negative cable to battery.