LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Neon LE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Verification Tests >> Air Bag Verification Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Bag Verification Test

CAUTION: Always turn ignition off before disconnecting or connecting any control module connectors. Failure to do so could result in damage to control module.
  1. Remove all test equipment and jumper wires. Connect any disconnected components, except battery. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure. Turn ignition on, then connect negative battery cable.
  2. Using scan tool, erase Diagnostic Trouble Codes (DTC) from all modules. Turn ignition off and wait 15 seconds. Turn ignition on and wait one minute. Using scan tool, retrieve DTCs from all modules. If no DTCs exist and customer's complaint cannot be duplicated, system is operating correctly and repair is complete. If any DTCs exist, perform appropriate test. See DIAGNOSTIC TROUBLE CODE IDENTIFICATION  table under SELF-DIAGNOSTIC SYSTEM. If no DTCs exist but symptom still exists, return to SYMPTOM IDENTIFICATION  table under SELF-DIAGNOSTIC SYSTEM and repair by symptom.
scientia non olet · About LEMON Manuals