LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Neon LE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self Diagnostics >> Diagnostic Tests >> Test VER-4A: Speed Control Verification >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all engine, speed control system and related components are connected. Reassemble and reconnect components as necessary. Connect scan tool to DLC. Clear all DTCs from PCM.
  2. To ensure no speed control system problem exists, turn speed control switch on. CRUISE light will illuminate, if equipped. Road test vehicle at a speed greater than 35 MPH. Depress and release steering wheel speed control SET switch.
  3. If speed control engages, go to next step. If speed control does not engage, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  4. Quickly depress and release steering wheel speed control RESUME/ACCEL switch. If vehicle speed increases by 2 MPH, go to next step. If vehicle speed does not increase by 2 MPH, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  5. Hold steering wheel speed control COAST switch downward. If vehicle speed decreases, go to next step. If vehicle speed does not decrease, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  6. Using caution, depress and release brake pedal. If speed control disengages, go to next step. If speed control does not disengage, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  7. Increase vehicle speed to 35 MPH. Depress steering wheel speed control RESUME/ACCEL switch. If vehicle resumes to original speed, go to next step. If vehicle does not resume to original speed, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  8. Hold steering wheel speed control SET switch downward. If vehicle speed decreases, go to next step. If vehicle speed does not decrease, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  9. Ensure vehicle speed is greater than 35 MPH. Release steering wheel speed control SET switch. If vehicle speed adjusts and sets at a new vehicle speed, go to next step. If vehicle speed does not adjust and set at a new vehicle speed, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  10. Depress steering wheel speed control CANCEL switch. If speed control disengages, go to next step. If speed control does not disengage, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
  11. Increase vehicle speed to 35 MPH and engage speed control. Depress steering wheel speed control ON/OFF switch to OFF position. CRUISE light should turn off (if equipped). If speed control disengages and CRUISE light turns off, system is operating correctly. Repair is complete. If speed control does not disengage or CRUISE light does not turn off, repair is not complete. Check for related Technical Service Bulletins (TSBs) and any speed control related DTCs. Perform appropriate DTC or symptom test if necessary.
scientia non olet · About LEMON Manuals