LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Neon LE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Computer Relearn Procedures) >> Relearn Procedures >> Engine Control Module Programming (Diesel)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module Programming (Diesel)

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2000 Plymouth Voyager, 2000 Plymouth Neon, 2000 Plymouth Grand Voyager, 2000 Plymouth Breeze, and 2000 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If battery is disconnected, Engine Control Module (ECM) is disconnected or replaced, or Accelerator Pedal Position Sensor (APPS) has been disconnected or replaced, ECM must be programmed to match the APPS.

Ensure all components are connected. Turn ignition on with engine off. Slowly depress accelerator pedal to the floor and release accelerator pedal to idle position one time. This ensures that APPS calibration has been programmed into the ECM. Turn ignition off.

scientia non olet · About LEMON Manuals