LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Sebring JX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Convertible >> Diagnostic Tests >> Test VER-5A3: OBD-II Monitor Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-5A3: OBD-II Monitor Verification

  1. OBD-II monitor operation may be observed on the scan tool. In order for OBD-II monitor to be run, certain pretest enabling conditions must be met. Refer to applicable OBD-II monitor pretest screen on scan tool for monitor enabling conditions. Proper way to ensure DTC is properly repaired is to allow PCM to run the OBD-II monitor.
  2. Operate vehicle within enabling conditions and allow OBD-II monitor to run for repaired DTC. After OBD-II monitor is complete, view the results on scan tool. If OBD-II monitor runs and GLOBAL GOOD TRIP COUNTER changes to one or more, condition is no longer present and repair is complete. If OBD-II monitor fails, repaired DTC has reset, or any DTCs exist, repair is not complete. Check for related Technical Service Bulletins (TSBs) or flash updates and proceed to appropriate DTC test.
scientia non olet · About LEMON Manuals