LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Sebring JXi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Convertible >> Diagnostic Tests >> Test VER-4A: Speed Control Verification >> Updating Secret Key Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Updating Secret Key Data

  1. Connect scan tool to Data Link Connector (DLC). Go to THEFT ALARM, SKIM and then MISC menus on scan tool. Place the SKIM in SECURED ACCESS MODE by using the appropriate Personal Identification Number (PIN) for this vehicle. PIN may be obtained from the owner, vehicle's invoice or from the manufacturer. Select UPDATE THE SECRET KEY DATA. The data will be transferred from Sentry Key Immobilizer Module (SKIM) to the PCM. This will enable the vehicle to start.
  2. If 3 attempts are made to enter the SECURED ACCESS MODE by using the incorrect Personal Identification Number (PIN), the SECURED ACCESS MODE will be locked out for one hour. To exit this locked out mode, leave ignition switch in the ON position with all accessories turned off for one hour. It may be necessary to monitor battery voltage and connect a battery charger if necessary. Proceed to final procedure.
scientia non olet · About LEMON Manuals