LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Sebring LXi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Self-Diagnostics - Except Convertible >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

  1. Ensure battery is fully charged. Ensure ignition is off. Connect scan tool to Data Link Connectors (DLC). See Fig 1. Start engine if possible or turn ignition on. Turn A/C switch on. Shut engine off and leave ignition on. Using scan tool manufacturer's instructions, record all DTCs and freeze frame data. If scan tool is able to communicate with PCM and all vehicle systems, go to step  3.
  2. If scan tool is unable to communicate with PCM or all vehicle systems, perform appropriate communication failure test. See TEST NTC-1: NO TROUBLE CODE TEST MENU  under DIAGNOSTIC TESTS.
  3. If any DTCs are displayed, perform appropriate diagnostic test under DIAGNOSTIC TESTS. To determine appropriate procedure to perform, see DTC & TEST IDENTIFICATION  table under DIAGNOSTIC TROUBLE CODE DEFINITIONS.
  4. After repair is complete, clear DTCs from PCM memory. See CLEARING DIAGNOSTIC TROUBLE CODES . If no DTCs are displayed, diagnose by symptom. See TEST NTC-1: NO TROUBLE CODE TEST MENU  under DIAGNOSTIC TESTS.
Fig 1: Connecting Scan Tool To Data Link Connectors
G95E32692Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals