LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Sebring Limited >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Convertible >> Diagnostic Tests >> Test VER-3A: Charging System Verification >> Final Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Final Procedure

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Using scan tool, clear all DTCs from PCM.
  2. To ensure no charging system problem exists, start engine. Increase engine speed to 2000 RPM for at least 30 seconds. Allow engine to idle. Shut engine off.
  3. Using scan tool, check for DTCs. If no DTCs exist, repair is complete. If repaired DTC has reset or another DTC has set, test is not complete. Check for related Technical Service Bulletins (TSBs) and perform appropriate DTC test.