LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Sentry Key Immobilizer Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Immobilizer Module

CAUTION: If wrong country code is programmed into Sentry Key Immobilizer Module (SKIM) when requested, SKIM must be replaced.
NOTE: SKIM will only remain in secured access mode for 60 seconds. If incorrect unique Personal Identification Number (PIN) is entered 3 times, SKIM will be locked for one hour. To unlock SKIM, turn ignition on for one hour. When SKIM is locked, scan tool will display BUS +/- SIGNALS OPEN.
  1. Obtain vehicle's unique Personal Identification Number (PIN) assigned to SKIM from vehicle owner or manufacturer. Ensure ignition is off. Remove all test equipment and jumper wires. Connect any disconnected components. Go to next step.
  2. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Using scan tool, select SKIM REPLACEMENT. Enter 4-digit PIN to put SKIM in access mode. Go to next step.
  3. Using scan tool, select THEFT ALARM, SKIM, MISCELLANEOUS, then select desired procedure and follow steps displayed on scan tool. If SKIM has been replaced, ensure all keys and remote transmitters to be used with vehicle are programmed into SKIM. See SENTRY KEYS  and REMOTE KEYLESS ENTRY TRANSMITTER  .
scientia non olet · About LEMON Manuals