LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Instrument Cluster Systems >> Cruise On Indicator Not Operating Properly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise On Indicator Not Operating Properly

NOTE: After making any repairs, perform BODY CONTROL MODULES SYSTEM VERIFICATION TEST  under VERIFICATION TESTS.
  1. To start bulb check, turn ignition off, then on. Observe cruise on indicator. If cruise on indicator illuminates for 3-10 seconds, go to next step. If cruise on indicator does not illuminate for 3-10 seconds, go to step  4 .
  2. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Using scan tool, retrieve Powertrain Control Module (PCM) DTCs. If no PCM DTCs exist, go to next step. If any PCM DTCs exist, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.
  3. Test drive vehicle and operate cruise control. If cruise control operates properly, replace instrument cluster. If cruise control does not operate properly, see appropriate CRUISE CONTROL SYSTEMS article.
  4. Turn ignition on. Using scan tool, attempt to communicate with Powertrain Control Module (PCM). If scan tool communicates with PCM, go to next step. If scan tool does not communicate with PCM, perform NO RESPONSE FROM POWERTRAIN CONTROL MODULE (PCI BUS)  test under COMMUNICATIONS SYSTEM.
  5. Turn ignition off. Inspect cruise on indicator bulb and socket. Repair or replace indicator bulb and/or socket as necessary. If bulb and socket are okay, replace instrument cluster.
scientia non olet · About LEMON Manuals