LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Memory Systems >> PRNDL DISP MSG Not Received
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PRNDL DISP MSG Not Received

  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Using scan tool, attempt to communicate with Transmission Control Module (TCM). If scan tool communicates with TCM, go to next step. If scan tool does not communicate with TCM, perform NO RESPONSE FROM TRANSMISSION CONTROL MODULE OR BUS +/- SIGNALS OPEN  test under COMMUNICATIONS SYSTEM.
  2. Using scan tool, clear PRNDL DISP MSG NOT RECEIVED DTC from Memory Heated Seat/Mirror Module. Turn ignition off, then start engine. Wait one minute. Using scan tool, retrieve DTCs. If PRNDL DISP MSG NOT RECEIVED DTC resets, go to next step. If PRNDL DISP MSG NOT RECEIVED does not reset, test is complete. Perform MEMORY SYSTEMS VERIFICATION TEST  under VERIFICATION TESTS.
  3. Check related wiring and connectors for poor connections or damage to wiring harness. See WIRING DIAGRAMS  . Repair any problems found as necessary. If no problems are found, replace MHSMM.
scientia non olet · About LEMON Manuals