LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Motor: Installation

  1. Connect battery positive feed wire to starter.
  2. Connect posi-lock starter solenoid connector.
  3. Jack engine up slightly to give more room to maneuver starter assembly.
  4. Install the starter.
  5. Install three bolts attaching starter to engine (Figure). Tighten all fasteners to the proper torque. Refer to TORQUE SPECIFICATIONS .
  6. Install three left engine mount mounting bolts to engine block.
  7. Install starter solenoid assembly from transmission housing. Position the starter to gain access to the Connector Positive Assurance (CPA) wiring connector.
  8. Lower vehicle.
  9. Connect the battery negative cable (Figure).
scientia non olet · About LEMON Manuals