Blower Motor: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor in the HVAC housing and tighten the mounting screws. Install the blower motor housing cover.
- Position the blower motor wiring grommet in the blower motor housing cover. Connect the blower motor harness connector to the blower motor resistor block/power module.
- Install the lower right under panel duct. Connect the negative battery cable remote terminal to the remote battery post.