LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Body Control Modules) >> System Tests >> Overhead Console >> Display Segments Fail To Illuminate
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display Segments Fail To Illuminate

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.

Possible Causes:

Testing

  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Using scan tool, retrieve Powertrain Control Module (PCM) DTCs. If no PCM DTCs exist, go to next step. If any PCM DTCs exist, see SELF-DIAGNOSTICS - CONCORDE, INTREPID & 300M article in ENGINE PERFORMANCE.
  2. Check fuel gauge and odometer for proper operation. If problem exists, repair as necessary. Perform appropriate test(s) under INSTRUMENT CLUSTER SYSTEMS  . If problem does not exist, fault may be intermittent. Check related wiring and connectors for poor connections or damage to wiring harness. See WIRING DIAGRAMS  . Repair any problems found as necessary. If no problems are found, check if any Technical Service Bulletins (TSBs) apply to vehicle. If no TSBs apply, test is complete.
scientia non olet · About LEMON Manuals