Memory Positions

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, 2003 Chrysler 300M, and 2002 Dodge Intrepid. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Memory Heated Seat and Mirror Module (MHSMM) communicates with Remote Keyless Entry (RKE) system through the Programmable Communication Interface (PCI) bus (Violet/Yellow wire). MHSMM settings can be programmed and recalled by RKE module.

Set seat and mirrors to desired position. Press SET button on memory set switch. Press and release desired memory switch button ("1" or "2"). Press and release UNLOCK button on desired RKE transmitter. Do not press any buttons for 10 seconds.

Once transmitters have been programmed, horn chirp can be enabled/disabled by sending horn chirp toggle operation code to BCM. Enable procedure can be performed using scan tool, or by performing procedure in PROGRAMMING HORN ENABLE/DISABLE .