Gearshift Lever Locked In Place: Prowler
NOTE:
For circuit reference, see CONNECTOR IDENTIFICATION
and/or WIRING DIAGRAMS
.
- Gain access to BTSI solenoid and shift interlock cable. See Fig 1 . Go to next step.
- Disconnect solenoid harness connector. Insert ignition key and turn ignition switch to ON/RUN position. Depress brake pedal. Attempt to move gearshift lever from Park. If gearshift lever moves, see BTSI CIRCUIT under CIRCUIT TESTS. If gearshift lever does not move, go to next step.
- Disconnect shift interlock cable from floor shifter. If gearshift lever moves, replace shift interlock cable. If shift lever does not move, inspect shift lever assembly. Repair or replace as necessary.