LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid ES >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Memory Systems >> Front Riser Down Position Stuck
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Riser Down Position Stuck

NOTE: After making any repairs, perform MEMORY SYSTEMS VERIFICATION TEST  under VERIFICATION TESTS.
  1. Turn ignition off. Disconnect power seat switch connector. Turn ignition on. Measure voltage on power seat switch connector terminal No. 6, seat front down switch sense circuit (Red/Light Green wire). See Fig 1 . If any voltage exists, leave power seat switch connector disconnected, and go to next step. If no voltage exists, replace power seat switch.
  2. Turn ignition off. Disconnect Memory Heated Seat/Mirror Module (MHSMM) connector C1. Turn ignition on. Measure voltage on MHSMM connector C1 terminal No. 8, seat front down switch sense circuit (Red/Light Green wire). See Figure . If any voltage exists, repair short to voltage in Red/Light Green wire. If no voltage exists, replace MHSMM.
Fig 1: Identifying Power Seat Switch Connector Terminals
G99D02128Courtesy of DAIMLERCHRYSLER CORP.