LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Intrepid ES >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry System >> Removal & Installation >> Body Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Open driver's door. Pry off left instrument panel end cap. Remove 2 left side under-dash cover screws. Remove left side under-dash cover. Remove deck lid switch and wiring.
  2. Remove left knee bolster. Remove ducts under steering column. Disconnect connectors from junction block. Remove 4 junction block screws. Remove junction block. Disconnect BCM connectors. Remove Remote Keyless Entry (RKE) antenna connector (if equipped). Remove 3 RKE module-to-BCM screws. Remove RKE module. Remove 4 BCM-to-junction block screws. Separate BCM from junction block.
  3. To install, transfer RKE module to replacement BCM. To complete installation, reverse removal procedure. Program replacement BCM and enable VTSS (if equipped). See BODY CONTROL MODULE  under PROGRAMMING.
scientia non olet · About LEMON Manuals