RKE Program Mode Entered Without Program Request
NOTE:
After making any repairs, perform BODY CONTROL MODULES SYSTEM VERIFICATION TEST
under VERIFICATION TESTS.
- Turn ignition off. Connect scan tool to Data Link Connector (DLC). Replace Remote Keyless Entry (RKE) module. Using scan tool, program all RKE transmitters to be used with vehicle. See REMOTE KEYLESS ENTRY TRANSMITTER under PROGRAMMING. Go to next step.
- Using scan tool, clear Body Control Module (BCM) Diagnostic Trouble Codes (DTC). Using RKE transmitters, lock and unlock vehicle several times. Using scan tool, retrieve BCM DTCs. If RKE PROGRAM MODE ENTERED WITHOUT PROGRAM REQUEST DTC resets, replace BCM. If RKE PROGRAM MODE ENTERED WITHOUT PROGRAM REQUEST DTC does not reset, test is complete.