LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> Neon LE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Instrument Cluster >> SKIM Message Not Received By EMIC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SKIM Message Not Received By EMIC

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.

Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure . Turn ignition on. Using scan tool, clear Diagnostic Trouble Codes (DTC). Turn ignition off, then on. After 30 seconds, recheck DTCs. If SKIM MESSAGE NOT RECEIVED is displayed, go to BUS +/- SIGNAL OPEN OR NO RESPONSE FROM SKIM  under COMMUNICATIONS. If SBEC MESSAGE NOT RECEIVED is not displayed, test is complete.

scientia non olet · About LEMON Manuals