All Doors (Except Driver's) Fail To Unlock

Turn ignition off. Disconnect Black 26-pin RKE module connector, located under center of instrument panel top cover. See Figure . Using an ohmmeter, check resistance between RKE module connector terminal No. 6, door unlock driver circuit (Pink/Violet wire) and ground. See Figure . If resistance is less than 1000 ohms, repair Pink/Violet wire for short to ground. If resistance is 1000 ohms or more, replace RKE module. See REMOTE KEYLESS ENTRY MODULE  under REMOVAL & INSTALLATION. After repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.