LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2001 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Instrument Cluster >> SBEC Messages Not Received By EMIC
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SBEC Messages Not Received By EMIC

  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure. Clear DTCs.
  2. Turn ignition off. Turn ignition on. Wait 30 seconds. Using scan tool, check DTCs. If no DTCs are set, no problem is found at this time. Test is complete. If scan tool displays SBEC MESSAGES NOT RECEIVED BY EMIC, perform NO RESPONSE FROM PCM (PCI BUS)  under COMMUNICATIONS. Perform BODY VERIFICATION TEST .
scientia non olet · About LEMON Manuals