Description & Operation

Optional Remote Keyless Entry (RKE) system allows vehicle doors to be locked or unlocked, and liftgate to be unlocked using a hand-held transmitter. System consists of RKE module and up to 4 transmitters. Each transmitter has its own Vehicle Access Code (VAC). The VAC is programmed into the RKE module memory.

RKE transmitter has 3 buttons: UNLOCK, LOCK, and PANIC. System can be programmed to provide the following options:

• Pressing UNLOCK button once unlocks driver's door and enables illuminated entry. Pressing UNLOCK button twice within 5 seconds, unlocks all doors and liftgate. RKE system can be programmed to open all doors with one button press. See DOOR ONE BUTTON PRESS ENABLE/DISABLE  under PROGRAMMING.
• When LOCK button is pressed, parking lights will flash and horn will sound (chirp). Illuminated entry operation is canceled and interior lights fade out. Chirp feature can be enabled/disabled, signaling that "lock all doors" signal has been received and set. See HORN ENABLE/DISABLE  under PROGRAMMING.

Pressing PANIC button will activate Vehicle Theft Security System (VTSS) for approximately 3 minutes. Headlights and marker lights will flash, horn will pulse on and off, and interior lights will turn on. VTSS can be canceled by pressing PANIC button a second time or if vehicle reaches a speed of 15 MPH. For more information, see ANTI-THEFT SYSTEMS - PT CRUISER article.

RKE module retains VAC even when battery power is lost. RKE module must have at least one, but no more than 4 transmitters programmed. Transmitter maximum control range is approximately 23 ft. (7 m). Transmitter is powered by two 3-volt batteries (DL2016 or equivalent). A slight delay of up to 2 seconds can occur before doors or liftgate will unlock.