Right Window Switch Operation
NOTE:
Check the 20-amp circuit breaker located in the fuse block. Check for a good ground. Refer to the appropriate group of the Service Manual for additional test procedures.
When the window switch is moved to the window DOWN position, voltage is supplied on the F21 circuit through the CLOSED contacts in the switch the Q22 circuit. The Q22 circuit connects from the switch to the right front window motor. Grounding is provided on circuit Q12 from the motor back to the switch. The ground is passed through the switch to the Q16 circuit. The Q16 circuit connects from the right switch to the master switch to the Z1 circuit. The Z1 circuit goes to its grounding point. When window UP operation is selected, the power and ground circuits are reversed. Circuit Q12 is the feed and circuit Q22 is the ground. See WIRING DIAGRAMS .