Automatic Temperature Control

The BCM provides automatic temperature control support both through PCI bus communications and through processing inputs to determine control for actuators and the blower motor. The BCM interfaces with the ATC control head over the PCI bus. Information on button activation, blower setting and temperature setting are supplied to the BCM. In turn, the BCM supplies the ATC control head with mode information and indication lamp status. The BCM controls blower motor speed by providing a varying duty cycle of a fixed frequency output (pulse width modulation). There are 14 distinct blower speeds, plus a blower off signal. The BCM also controls the HVAC mode, temperature (blend air) and recirculation doors. This system is either fully automatic or fully manual control (no semi-automatic functions). The temperature blend door control is always automatically controlled based on sensor reading and comfort setting. The in-car sensor and the aspirator motor are now housed in the ATC control head.