Vehicle Theft Security System Indicator

The SKIM sends messages to the BCM to turn the LED on for about 3 seconds when the ignition switch is turned to the ON position as a bulb test. After completion of the bulb test, the SKIM sends bus messages to the BCM to keep the LED off for a duration of about one second. Then the SKIM sends messages to the BCM to turn the LED on or off based upon the results of the SKIS self-tests. If the VTSS indicator LED comes on and stays on after the bulb test, it indicates that the SKIM has detected a system malfunction and/or that the SKIS has become inoperative. If the SKIM detects an invalid key when the ignition switch is turned to the ON position, it sends messages to the BCM to flash the VTSS indicator LED.

The SKIM can also send messages to the BCM to flash the LED and to generate a single audible chime tone. These functions serve as an indication to the customer that the SKIS has been placed in its "Customer Learn" programming mode. The VTSS indicator LED is housed in the Automatic Temperature Control (ATC) Sun Sensor located in the instrument panel top cover. If the VTSS indicator LED comes on and stays on after the bulb test function, diagnosis of the SKIS should be performed with a scan tool.