LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Door Trim Panel >> Installation (Front)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (Front)

  1. Place door trim panel in position.
  2. Install wire harness clips into door trim panel.
  3. Connect the courtesy lamp, if equipped.
  4. Connect the radio speaker wire connector.
  5. Connect the power window switch wire connector.
  6. Connect the power door lock switch wire connector.
  7. Connect the power mirror switch wire connector.
  8. Connect the linkage to the handle assembly.
  9. Hook door trim panel over the sheet metal flange.
  10. Insert the forward 4-way alignment guide into position. Insert the rearward 2-way alignment guide into position.
  11. Engage rear retaining clips to attach door trim panel to inner sheet metal panel, up to 3 ratchet clicks.
  12. Install 3 screws in the speaker area.
  13. Install 2 screws in the instrument panel interface area.
  14. Install screw in the remote bezel, and close trim plug.
  15. Install screw in pull cup, and close trim plug.
  16. Install 3 screws to the bottom of the door. See TORQUE SPECIFICATIONS  .
  17. Place speaker grille in position on trim panel.
scientia non olet · About LEMON Manuals