Start & Stall Condition: Notes
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For circuit identification and wiring diagram, see WIRING DIAGRAMS
. If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING
in SELF-DIAGNOSTICS - CONCORDE, INTREPID & 300M article. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-1
under VERIFICATION TESTS in SELF-DIAGNOSTICS - CONCORDE, INTREPID & 300M article to ensure system is functioning properly.