LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Cruise Control Systems) >> Cable >> Installation >> Installation - 3.5L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 3.5L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide speed control cable into bracket and with locator positioned into notch in bracket, then slide throttle cable into bracket and engage retaining tab.
  2. Rotate the throttle cam forward to the wide open position and install speed control cable clasp (Figure ).
  3. Rotate the throttle cam forward to the wide open position and install throttle cable clasp.
  4. Install throttle cable bracket and tighten bolts.
  5. Route cable through bracket and install retaining clip to cable at servo.
  6. Insert servo studs through holes in mounting bracket and speed control cable.
  7. Install nuts, tighten to 6.7 N.m (60 in.lbs.).
  8. Connect vacuum hose to servo.
  9. Connect electrical connector.
  10. Install servo and bracket and tighten bolts.
  11. Connect negative battery cable.
scientia non olet · About LEMON Manuals