LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Cruise Control Systems) >> Cable >> Removal >> Removal - 2.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal - 2.7L

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove speed control cable from throttle cam by sliding clasp out hole used for throttle cable.
  3. Compress the retaining tabs on the cable and slide cable out of bracket.
  4. Remove 2 nuts and 1 bolt from servo bracket.
  5. Disconnect electrical connectors and vacuum hose.
  6. Remove two nuts attaching speed control cable and mounting bracket to servo.
  7. Pull cable away from servo to expose retaining clip and remove clip attaching cable to servo.
  8. Remove servo mounting bracket.
scientia non olet · About LEMON Manuals