LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Cruise Control Systems) >> Servo >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 60 (Cruise Control Systems): Servo: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. With throttle in full open position align hole in speed control cable sleeve with hole in servo pin and install retaining clip.
  2. Connect vacuum hose to servo.
  3. Connect electrical connector.
  4. Insert servo studs through holes in speed control cable and mounting bracket.
  5. Install nuts, tighten to 6.7 N.m (60 in.lbs.).
  6. Install servo and bracket and tighten bolt and nuts.
  7. Connect negative battery cable.
scientia non olet · About LEMON Manuals