LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Computer Relearn Procedures) >> Ford Motor Co. >> Instrument Cluster Programming >> Instrument Cluster Programming Procedure "A"
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Instrument Cluster Programming Procedure "A"

WARNING: This page does not describe the selected car, but rather 120 other vehicles, including the 2002 Saturn Vue, 2002 Saturn SL2, 2002 Saturn SL1, 2002 Saturn SL, and 2002 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: After Hybrid Electronic Instrument Cluster (HEC) has been replaced, PCM ID MUST be reset and Passive Anti-Theft System (PATS) parameter reset procedure MUST be performed. See SECURITY ACCESS PROCEDURE .

Perform security access for instrument cluster. See SECURITY ACCESS PROCEDURE . Using NGS tester, select PARAMETER RESET command for instrument cluster. Using NGS tester, select PARAMETER RESET command for PCM. Disconnect negative battery cable and wait 3 minutes for PCM Keep Alive Memory (KAM) to clear. Reconnect negative battery cable. Cycle ignition switch from OFF to ON position using 2 encoded ignition keys. Both PATS keys and PCM ID should be set in instrument cluster.

scientia non olet · About LEMON Manuals