LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Neon LE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Power Door Locks/Remote Keyless Entry >> Automatic Door Lock Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Door Lock Inoperative

NOTE: After making any repairs, perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  1. Turn ignition off. Connect scan tool to Data Link Connector (DLC). DLC is located on bottom of instrument panel, to left of brake pedal. See Figure . Turn ignition on. Using scan tool, select BODY, THEFT ALARM, VTSS, MISCELLANEOUS, then AUTO DOOR LOCKS. If scan tool displays AUTO DOOR LOCKS: ENABLED, go to next step. If scan tool displays AUTO DOOR LOCKS: DISABLED, use scan tool to enable automatic door locks.
  2. Ensure all door's are closed. Using scan tool, select DOOR AJAR states. If any door states display OPEN, go to next step. If all door states display CLOSED, go to COURTESY LIGHTS ON AT ALL TIMES  under INTERIOR LIGHTING.
  3. Using scan tool read ENGINE Diagnostic Trouble Codes (DTC). If any ENGINE DTCs are displayed, perform corresponding test in SELF-DIAGNOSTICS - NEON article in ENGINE PERFORMANCE. If no ENGINE DTCs are displayed, replace Remote Keyless Entry (RKE) module. See REMOTE KEYLESS ENTRY MODULE  under REMOVAL & INSTALLATION.