Power Window Switch

Remove power window switch. Check continuity between appropriate switch terminals with switch in appropriate position. See WINDOW SWITCH CONTINUITY TEST table. See Fig 1 . If continuity is not as specified, replace appropriate power window switch. See WINDOW SWITCH under REMOVAL & INSTALLATION.

WINDOW SWITCH CONTINUITY TEST

Switch Position

⁽¹⁾ Continuity Between Terminals No.

3 & 8; 4 & 5

Neutral

3 & 8; 2 & 5

Down

4 & 8; 2 & 5

⁽¹⁾	Driver's window switch has 2 connectors. Gray connector is for operation of passenger's window and Black connector is for operation of driver's window. See Fig 1 .

Fig 1: Identifying Window Switch Terminals (Harness Side Shown)

Courtesy of DAIMLERCHRYSLER CORP.