LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Neon LE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Programming >> Sentry Key Immobilizer Module >> Programming SKIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming SKIM

  1. Connect DRBIII(R) to Data Link Connector (DLC). DLC is located below driver's side of instrument panel. See Figure . Place transmission in Park or Neutral. Turn the ignition on, with the engine off.
  2. With DRBIII(R), select THEFT ALARM, SKIM then MISC.
  3. Select SKIM MODULE REPLACEMENT GASOLINE
  4. Program the 4-digit Personal Identification Number (PIN) into the SKIM.
    5. CAUTION: Enter correct country code in SKIM. If incorrect country code is entered, SKIM must be replaced.
  5. Select COUNTRY CODE and enter the correct country.
  6. Select UPDATE VIN (the SKIM will learn the VIN from the PCM).
  7. Press ENTER to transfer the VIN (the PCM will send the VIN to the SKIM).
  8. The DRBIII(R) will ask if you want to transfer the secret key from the PCM. This will ensure the current vehicle ignition keys will still operate the Sentry Key Immobilizer System (SKIS).
scientia non olet · About LEMON Manuals