LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery >> Installation >> Diesel Engine
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diesel Engine

  1. Position the battery in the vehicle.
  2. Connect the battery positive cable.
  3. Lift the battery retaining strap and install the battery in its tray.
  4. Install bolt and retainer that holds the battery down to the tray.
  5. Clip the vent tubing assembly on the battery retaining strap.
  6. Connect the vent tube assembly.
    WARNING: BE CERTAIN TO PROPERLY CONNECT THE BATTERY VENT SYSTEM. FAILURE TO DO SO COULD RESULT IN TOXIC FUMES BEING RELEASED INSIDE THE VEHICLES PASSENGER COMPARTMENT. REPLACE ANY PART OF THE VENT SYSTEM IF IT SHOWS ANY SIGNS OF WEAR, CRACKING, COLLAPSING, PUNCTURE OR ANY OTHER FORM OF IMPERFECTION.
  7. Connect the battery negative cable.
  8. Install the seat front trim panel.
  9. Install the two screws in the seat front trim panel.
  10. Close the passenger door.
  11. Verify operation of vehicle and systems.
scientia non olet · About LEMON Manuals