Gasoline Engine
WARNING:
TO PROTECT THE HANDS FROM BATTERY ACID, A SUITABLE PAIR OF HEAVY DUTY RUBBER GLOVES, NOT THE HOUSEHOLD TYPE, SHOULD BE WORN WHEN REMOVING OR SERVICING A BATTERY. SAFETY GLASSES ALSO SHOULD BE WORN.
- Make sure ignition switch is in OFF position and all accessories are OFF.
- Open hood.
- Remove the air cleaner housing (Refer to 2.4L DOHC ).
- Disconnect and isolate the battery negative cable then the positive cable.
- Loosen bolt and retainer that holds the battery down to the tray (Fig 1 ).
- Lift battery out of battery tray and remove from vehicle.
- Remove thermal guard from battery.