ABS Indicator Circuit Open
CAUTION:
The Instrument Cluster performs internal tests on the ABS and Airbag indicators each ignition cycle. These indicator LEDs are not replaceable.
NOTE:
After making any repairs, perform BODY VERIFICATION TEST under VERIFICATION TESTS.
With the DRBIII®, erase DTCs. Cycle the ignition and wait approximately 1 minute. If the ABS or Airbag indicator DTC reset, replace the instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION in appropriate ANALOG INSTRUMENT PANELS article. If the ABS or airbag indicator DTC did not reset, the test is complete.