LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Prowler >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery System >> Fuel Rail >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Rail: Installation

  1. Lightly lubricate the fuel injector O-rings with a couple drops of clean engine oil.
  2. Install retaining clips on fuel injectors.
  3. Push injectors into fuel injector rail until clips are in the correct position.
  4. Position fuel rail over cylinder heads, and push rail into place. Tighten fuel rail mounting bolts to 12 N.m (105 in. lbs.) torque.
  5. Install intake manifold plenum. Refer to the ENGINE for intake installation.
  6. Connect negative cable to battery.
  7. Use the DRB to check for leaks.
scientia non olet · About LEMON Manuals