LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Programming >> Remote Keyless Entry System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Keyless Entry System

NOTE: For additional information on Remote Keyless Entry System (RKE) system, see REMOTE KEYLESS ENTRY SYSTEM - CARAVAN, TOWN & COUNTRY, & VOYAGER article.
  1. A previously programmed transmitter must be used. If vehicle is equipped with anti-theft system, ensure system is in disarm mode. Ensure transmitter batteries have about 3.2 volts each. Turn ignition on. Place transmission in Park.
  2. Using a previously programmed transmitter, press and hold unlock button 5-10 seconds. After holding unlock button down for a minimum of 5 seconds, press and hold panic button, then release both buttons simultaneously. Chime should sound once to indicate Body Control Module (BCM) has recognized RKE transmitter programming.
  3. Press and release lock and unlock buttons simultaneously. Then press and release any button on transmitter. Chime should sound once to indicate RKE module has accepted the transmitter signal.
  4. Repeat step  3 for all transmitters that will be used by vehicle. Up to a total of 4 transmitters can be programmed. Programming mode will last for 30 seconds after programming transmitter. A chime will sound after 30 seconds to indicate programming has automatically cancelled. To manually exit programming mode, turn ignition off.
scientia non olet · About LEMON Manuals