LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2002 >> Voyager EC >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Communications >> APM Messages Not Received
April 5, 2026: LEMON Manuals is launched! Read the announcement.

APM Messages Not Received

  1. Turn the ignition on. With the DRB, attempt to communicate with the Adjustable Pedals Module. If the DRB was able to I/D or communicate with the APM, go to the next step. If the DRB was not able to I/D or communicate with the APM, refer to the Communication category of the DIAGNOSTIC TROUBLE CODE IDENTIFICATION table for the related symptom(s). See DIAGNOSTIC TROUBLE CODE IDENTIFICATION  table.
  2. With the DRB, erase DTC's. Cycle the ignition switch from off to on and wait approximately 1 minute. With the DRB, read DTC's. If the DTC reset, replace the Body Control Module. See BODY CONTROL MODULE  under REMOVAL & INSTALLATION. If the DTC did not reset, the test is complete.
scientia non olet · About LEMON Manuals