MSM Messages Not Received
NOTE:
After making any repairs, perform BODY VERIFICATION TEST under VERIFICATION TESTS.
- Turn ignition on. Using scan tool, attempt to communicate with Memory Seat/Mirror Module (MSMM). If scan tool communicates with MSMM, go to next step. If scan tool does not communicate with MSMM, go to BUS +/- SIGNALS OPEN FROM MEMORY SEAT/MIRROR MODULE .
- Using scan tool, erase DTCs. Turn ignition off and on. Wait a minimum of one minute. Using scan tool, check for DTCs. If DTC resets, replace Body Control Module (BCM). See BODY CONTROL MODULE under REMOVAL & INSTALLATION. If DTC does not reset, testing is complete.