Incomplete Power Close - Transistor Shorted
NOTE:
After making any repairs, perform BODY VERIFICATION TEST under VERIFICATION TESTS.
With the DRBIII®, record and erase DTC's. Turn the ignition off, wait 10 seconds, then turn the ignition on. Operate the power liftgate several times if possible. With the DRBIII®, read ACTIVE DTCs. If the DRBIII® displays INCOMPLETE POWER CLOSE - TRANSISTOR SHORTED, replace the Power Liftgate Module. See POWER LIFTGATE MODULE under REMOVAL & INSTALLATION. If the DRBIII® does not display INCOMPLETE POWER CLOSE - TRANSISTOR SHORTED, inspect the wiring and connectors for an intermittent condition. Operate the liftgate several times and check for any binding conditions.