LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution System >> Junction Block >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Junction Block: Installation

  1. Install Junction Block/BCM to vehicle.
  2. Connect BCM wire connectors and RKE antenna connector.
  3. Install Junction Block/BCM.
  4. Install wire harness connectors to Junction Block/BCM.
  5. Install four mounting screws.
  6. Install under column ducts.
  7. Install left knee blocker.
  8. Connect cable to hood release, deck lid release switch wiring, and install two screws to lower instrument panel.
  9. Install left end cap.
  10. Connect the negative battery cable remote terminal to the remote battery post.
scientia non olet · About LEMON Manuals