LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SE >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine System Testing & Engine Component Testing >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine System Testing & Engine Component Testing: Introduction

Before testing separate components or systems, follow proper workflow. See DIAGNOSTIC PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - CONCORDE, INTREPID & 300M article. If no Diagnostic Trouble Codes (DTC) are present and a no-start condition exists, proceed to NO-START DIAGNOSIS in BASIC DIAGNOSTIC PROCEDURES - CONCORDE, INTREPID & 300M article. If no DTCs are present and a driveability condition exists, proceed to TROUBLE SHOOTING - NO CODES - CARS - EXCEPT SEBRING COUPE & STRATUS COUPE article for diagnosis by symptom (i.e., ROUGH IDLE, ENGINE STALLS, etc.).

NOTE: Testing individual components does not isolate shorts or opens. Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.
scientia non olet · About LEMON Manuals