LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Body Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module: Removal

  1. Remove the junction Block/BCM from the vehicle.
  2. Remove the four BCM attaching screws from the junction Block.
  3. Disconnect BCM form the junction block.
NOTE: The Remote Keyless Entry (RKE) module is attached to the BCM with three screws. this must be transferred (if equipped) to the new BCM.
NOTE: If the BCM is replaced, the vehicle theft/security system (VTSS (if equipped) must be enabled in the new BCM via the DRB III(R) scan tool in order to start the vehicle.
scientia non olet · About LEMON Manuals